SAND SEPARATORS IN STOCK as of Oct. 9, 2017

NOTE: All sand separators include heavy duty oilfiled skid, a safety relief valve, and an oversized pressure gauge.

24" x 8' x 10,000 psi ASME Div. 2 skidded Sand Separator, 4 in stock
3" 1502 inlet, 3" 1502 outlet Removable, inspectable inlet diverter
Mfgr: Transtech, 2015. Nat'l Bd. Registered Stamps: ASME, U2, W, FULL, HT, NB
2" 1502 sand outs 3" 1502 drain w/plug
1" Safety Relief Valve set to 10,000 psi & Pressure Gauge Heavy duty oilfeild 6' x 6' skid
New; built 2015, ASME Section VIII Div. 2 (U2) Temp Range: -20F to 200F @ 10,000 psi
Documentation: Form A-1 (U1A for Div. 2), MTRs, NDE Reports, PWHT charts, Impact Test Report, AB Drawings

24" x 8' x 10000 PSI Skidded ASME Div. 2 Sand Separator


20" x 8' x 5800 psi HF ASME and NACE skidded Sand Separator, SOLD-OUT
3" 1502 inlet, threaded (male) half Removable, inspectable inlet diverter
3" 1502 outlet, wingnut half Stamps: ASME, U, HT, RT-1, NB, and W
2" 1502 dual sand outs Dual sand outs in case one side gets clogged
1" Safety Relief Valve set to 5800 psi & Pressure Gauge Heavy duty oilfeild skid
New; ASME & NACE. Mfgr: Dura-Strong & Transtech Temp Range: -20F to 300F @ 5800 psi
Documentation: U1A, NDE Reports, NACE Certificate, PWHT Report, Hydro-test Chart, and MTRs

ASME 20" x 8' x 5800 PSI Sand Separator with 1502 connections


20" x 8' x 5800 psi Flanged ASME, ABSA CRN and NACE skidded Sand Separator SOLD-OUT
3" flanged or 1502 inlet, customer choice Removable, inspectable inlet diverter
3" RF flanged outlet Stamps: CRN (AB), ASME, U, HT, RT-1, NB, and W
2" and 3" flanged sand outs 2" flanged drain w/blind
1" Safety Relief Valve set to 5800 psi & Pressure Gauge Heavy duty oilfeild skid
New; ASME, CRN & NACE. Mfgr: TSI Temp Range: -20F to 300F @ 5800 psi
Documentation: ABSA CRN, U1A, NDE Reports, NACE Certificate, PWHT Report, Hydro-test Chart, and MTRs

ASME and ABSA CRN 20" x 8' x 5800 PSI Sand Separator with flanged connections

ASME and ABSA CRN 20" x 8' x 5800 PSI Sand Separator ID plate


30" x 10' x 5,000 psi non-code skidded Sand Trap, SOLD-OUT
3" 1502 inlet, 3" 1502 outlet Removable, inspectable inlet diverter
Forged shell, 24" ID Dual 3" 1502 sand outs
2" 1502 drain with plug 1" Safety Relief Valve set to 5,000 psi
Heavy duty oilfeild skid w/integrated ladder Over-sized pressure gauge
New; built 2014, non-code, hydro-tested to 6,500 psi Flow rate: up to 30 MMSCF / Day

30 x 10 x 5000 PSI Sand Trap




Home | Site Map | Facebook
Mountain Equipment of New Mexico, Inc.
All Rights Reserved. Copyright 2017.